High Speed Closed Cycle Centrifugal Spray Dryer

High Speed Closed Cycle Centrifugal Spray Dryer

Product feature

1. Fast drying speed. The surface area of the material liquid is greatly increased after centrifugal spray, and 95~98% water can be evaporated in the high temperature air stream instantly, and the drying time only takes a few seconds

2. The use of parallel flow type spray drying form can make the droplets and hot air flow in the same direction, although the temperature of hot air is high, but because the hot air into the drying room immediately contact with the spray droplets, the indoor temperature drops sharply, does not cause excessive heating of dry materials, so it is suitable for heat sensitive materials drying

3. As the drying process is completed in an instant, the finished particles can basically maintain the spherical shape of the droplet, and the product has good dispersion, fluidity and solubility

4. Simplified production process and convenient operation and control. Spray drying is usually used for 50-80% wet content of the solution, even if the wet content of special materials is up to 90‰, the same can be dried into powder products, most of the products after drying, do not need to be crushed, reduce the production process, simplify the production process, improve the purity of the product. For product particle size, bulk density, moisture, within a certain range, can change the operating conditions for adjustment, control, management is very convenient.

5. In order to make the material not polluted and extend the life of the equipment, all parts in contact with the material are made of stainless steel 304 material, in order to make the operation convenient, the control system adopts the integrated operation, that is, the indicator device and the opening and closing device of each component are installed in the control cabinet.

6. The Angle of the main tower and cyclone cone is 60 degrees, and the air hammer is installed for convenient discharging.

Product superiority

1. Dry quickly

The surface area of the material liquid is greatly increased after centrifugal spray, and 9598% water can be evaporated instantly in the high temperature air stream. The drying time only takes a few seconds.

2. Easy to use

The operation is simple and convenient, and the production process is simplified, and can carry out continuous production.

3. Easy management

After drying, there is no need for crushing and screening, reducing production procedures and improving product purity.

Specification