Hollow Spiral Vacuum Continuous Dryer Screw Vacuum Dryer
Product feature
Spiral vacuum dryer through the internal hollow blade structure to make the material in the box full circulation flow, fully increase the material contact heat energy, dry material more uniform, no dead corner residue, heat transfer using hollow blades and the box wall heat energy, materials are wrapped by heat flow, heat energy almost no loss, the whole equipment uses a sealed working mode to prevent dust, odor, no leakage The condensate recovery device is used to recover the available resources and pollution so as to achieve pollution-free discharge. According to the temperature requirements of the material, different heating media can be used: steam, hot water, heat conduction oil. According to the different feeding methods of the material, one time and several times can be added.
- Energy saving: The heating area of the equipment increases, and the heat energy is fully absorbed by the material, reducing the heat energy loss
- Environmental protection: The equipment operates under vacuum, and can be recycled in the utilization of resources through the condensate recovery device, without pollution emission
- High efficiency: due to the increase of the heating area of the equipment, the efficiency of the conventional drying equipment is greatly improved, thus saving energy consumption.
Specification
|
Specifications and models |
Total volume (L) |
Heat transfer area (㎡) |
Motor power (kw) |
Speed of mainshaft (rpm) |
Jacket, blade design pressure(Mpa) |
Evaporation capacity (kg/h) |
Length (mm) |
Wide (mm) |
High (mm) |
|
200 |
200 |
2.4 |
2.2 |
~15 |
<1.0 |
25~50 |
2400 |
1050 |
2200 |
|
500 |
500 |
6 |
4 |
~15 |
<1.0 |
50~130 |
2700 |
1200 |
2400 |
|
1000 |
1000 |
12 |
5.5 |
~13 |
<1.0 |
120~250 |
3200 |
1500 |
2600 |
|
1500 |
1500 |
18 |
7.5 |
~13 |
<1.0 |
250~400 |
3500 |
1650 |
2850 |
|
2000 |
2000 |
24 |
11 |
~12 |
<1.0 |
250~450 |
3800 |
1800 |
2900 |
|
2500 |
2500 |
30 |
11 |
~12 |
<1.0 |
350~400 |
4000 |
1900 |
3100 |
|
3000 |
3000 |
36 |
15 |
~10 |
<1.0 |
350~620 |
4200 |
2000 |
3200 |
|
3500 |
3500 |
42 |
15 |
~10 |
<1.0 |
400~750 |
4500 |
2100 |
3400 |
|
4000 |
4000 |
46 |
15 |
~10 |
<1.0 |
450~900 |
4800 |
2200 |
3600 |
